RUDABAWeld-on Lifting Point

Ready and Tough – in all directions

Rigid weld-on-blocks make sense:

for construction parts that are subject to constant rotary motion, strong vibrations and shocks;
if the height of the lifting points does not cause obstruction;
if the lifting means are to be suspended with
only one hand;
for application on thinner workpieces.

On many constructions, however, you will find weld-on flame cut plates, which have considerable and often serious disadvantages. The W-ABA from RUD (lifting point that can be loaded on all sides) meets all requirements for modern, safe lifting lugs – and all this in an attractive design. The requirements of DIN EN 1090 are fulfilled thanks to the endless circular fillet weld seam. Since there is no risk of contact/crevice corrosion, W-ABA can also be used for outdoor constructions.

Features

Full WLL in any direction with 4:1 design factor
100% Electro-magnetic crack detection tested
Manufactured in Germany using high tensile CrNiMo – steel
Rated capacity can be increased by 100% in specific lashing capacities
Clear marking of the WLL
Patented wear markings on the inside and on the outside
Complies with EN 1677
Temperature Range -40ºC to 200ºC no reduction in WL

TYPE	WLL (t)	A [mm]	B [mm]	C [mm]	D [mm]	E [mm]	F [mm]	T [mm]	WEIGHT (kg)	Reference Number
ABA 0.8 t	0.8	22	12	70	32	12	50	32	0.2	7907698
ABA 1.6 t	1.6	30	16	100	35	16	57	42	0.45	7900352
ABA 3.2 t	3.2	41	23	137	50	21	80	59	1.15	7900353
ABA 5 t	5.0	51	27	172	60	28	99	72	2.26	7900354
ABA 10 t	10.0	70	38	228	80	35	130	95	5.37	7900355
ABA 20 t	20.0	90	52	272	115	40	175	135	10.72	7902174
ABA 31.5 t	31.5	108	64	320	130	50	204	154	18.33	7902175